Aqua Mix

Aqua Mix

Aqua Mix Products

Sealers

Enrich N Seal
Purpose: No sheen, enhanced look, which darkens, enriches and highlights unsealed natural stone. Rejuvenates color, and improves appearance of worn stone. For indoor or outdoor use.
For use on: Marble, granite, slate, limestone, travertine, quartzite and sandstone.
Coverage: Between 500 – 1500 sq. ft. / gallon.
Expected wear: 15 years.


Penetrating Sealer

Purpose: Economical, no sheen, natural look, water based sealer designed to resist stains. For indoor or outdoor use.
For use on: All natural stone, cement pavers.
Coverage: Approximately 300-1000 sq. ft. per gallon.
Expected wear: 5 years.

Sealer’s Choice Gold
Purpose: Premium no sheen, natural look, water based, penetrating sealer that provides maximum stain protection especially in food preparation and serving areas. For indoor and outdoor use.
For use on: Can be used on all natural stone where natural look is desired.
Expected wear: 15 years.

Stone Enhancer
Purpose:
No-sheen, enhanced-look penetrating sealer for darkening and highlighting the character and beauty of unsealed natural stone. It rejuvenates the color and improves the appearance of worn and weathered stone. For indoor and outdoor use.
For use on: Unsealed natural stone – marble, granite, slate, limestone, travertine, quartzite, and sandstone.
Coverage: Approximately 500 to 1000 square feet per gallon.
Expected wear: 3 years.

Ultra Solv
Purpose: Premium, no-sheen, natural-look, solvent-based, penetrating sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. May also be used as a pre-grouting sealer. It is also an excellent grout sealer. Effective for interior and exterior applications.
For use on: All natural stone (such as marble, granite, slate, travertine and limestone), porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other porous tile and grout where a natural look is desired.
Expected wear: Up to 15 years.

Cleaners

Stone Deep Clean
Purpose:
A concentrated heavy-duty cleaner and de-greaser designed to clean stone surfaces that have been neglected or subjected to heavy use. Effectively removes dirt, grease, and grime. Also removes waxes and floor finishes.
Coverage: Approximately 150 to 600 sq. ft per gallon (3.8 L) depending on dilution.

Problem Solvers

Ex-Treme
Purpose:
A non-flammable, heavy-viscosity acidic cleaner designed to remove years of accumulated discoloration from air pollution or carbon build-up. Removes stains from smoke, soot, red soil and rust. It is a safer alternative to traditional harsh acids.
For use on: Unpolished natural stone, concrete pavers, masonry surfaces, ceramic, porcelain, grout, quarry, saltillo, terra cotta, and other acid resistant tile and stone.
Coverage: Approximately 200 to 1,000 sq. ft per gallon (3.8 L) depending on dilution.

Eff Ex
Purpose:
Contains EX-2TM Technology, which allows Eff-Ex to remove and inhibit efflorescence. Eff-Ex is a non-acidic (pH 7.4), heavy-duty cleaner. Effective for interior and exterior applications.
For use on: Natural stone (such as marble, granite, slate, travertine, and limestone), porcelain, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other porous tile and grout where a natural look is desired. Please note that Eff-Ex will lightly dull the surface of polished marble, limestone, and travertine, and repolishing may be needed.
Coverage: Approximately 30 to 125 sq. ft per gallon (3.8 L)

Sealer and Coating Remover
Purpose:
Is a non-flammable, multipurpose stripper formulated to stay wet longer which gives the product time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives, and paints. Also dissolves deep-set stains and removes heavy grease buildup.
For use on: Natural stone (such as granite, limestone, marble, slate, and travertine), ceramic, porcelain, grout, quarry, saltillo, terra cotta, cement pavers, and masonry surfaces.
Coverage: Approximately 75 to 200 sq. ft Per gallon (3.8 L).

Nano Scrub
Purpose:
It utilizes NanoSTG (nano-ized particles) to penetrate into small surface pores where it can effectively work to remove surface stains and residues. Effective for cleaning all stone and tile surfaces. Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground-in dirt and most sealer residues. Nano Scrub is nontoxic, non-flammable and non-acidic.
For use for: Porcelain, ceramic, polished and unpolished natural stone (such as granite, limestone, marble, slate, and travertine), grout, quarry, saltillo, terra cotta, cement pavers, masonry surfaces, and other stone, tile and grout surfaces.
Coverage: Approximately 200 to 2,000 sq. ft per gallon (3.8 L).

Phosphoric Acid Substitute
Purpose:
Is a premixed acidic treatment designed to remove grout haze, mineral deposits, rust stains, mortar smears, and efflorescence. Effective for the removal of most hard water stains, lime deposits, and soap scum. Also removes cement grout and mortar residue from tile, concrete, and masonry. Etches concrete. No VOCs, No phosphates.
For use on: Acid resistant natural stone (such as granite and slate), ceramic, porcelain, quarry, saltillo, terra cotta, and other acid resistant tile and stone.
Coverage: Approximately 400 to 1,200 sq. ft per gallon (3.8 L) depending on dilution.