Seal King

Seal King

Steps to Seal

  • Wait at least three months before sealing new interlocking stones to allow the efflorescence to work its way out of the stones
  • Remove any oil, efflorescence (whitish salt), dirt and other contaminants.
  • Make sure area is completely dry (usually 24hrs without dampness) and warm to the touch.
  • Apply with roller, an airless industrial sprayer or pump-up sprayer.
  • WAIT 3 years before resealing.
  • Always wear protective gloves, clothing, and eye protection when handling cleaners and sealers.

Oil VS Water?

OIL Based

  • Protects against oil, dirt and salt.
  • Enhances colour of stone.
  • Touch dry in 30 minutes.
  • V.O.C. compliant.
  • Makes cleaning easier.
  • Lasts up to 3 years.
  • Coverage approx. 160 sq.ft / gal.
  • High-gloss or Semi-gloss 

WATER Based

  • Protects against oil, dirt and salt,
    anti-freeze, transmission fluid.
  • Leaves a wet look.
  • For both indoor and outdoor use.
  • Touch dry in 8 hours, can be
    driven on after 24 hours.
  • Coverage approx. 200 sq.ft / gal.
  • High-gloss or Semi-gloss

Other Seal King Products

Strip All

  • Helps remove old or tainted sealer from surface.
  • Fast dissolving properties.
  • Just apply, wait and remove.

Oil Off

  • Removes oil and grease from paving stone, concrete,
    asphalt as well as garages, engines, tires and rims.
  • Environmentally friendly and biodegradable.
  • Easy to use.
  • Pleasant odor.

Grease Release 

  • For paving stones and concrete.
  • Removes oil, tar, grease, adhesives, latex paint
    and driveway sealer.
  • Water-soluble.
  • After use simply rinse away.

Rust Remover

  • For paving stones and concrete.
  • Removes stubborn rust stains.
  • Easy to use.

Efflorescence Remover

  • Formulated to dissolve efflorescence (whitish salt).
  • Removes ground in dirt.
  • Brightens up the colour of the pavement stone.
  • Does not contain muriatic acid.